Thermal deaerator
Thermal deaerator (membrane deaerator) is a new type of deaerator, which can remove dissolved oxygen and other gases in the feed water of thermal systems and prevent the corrosion of thermal equipment. It is an important equipment to ensure the safe operation of power plants and industrial boilers. .
1. The oxygen removal efficiency is high, and the qualified rate of oxygen content in the feed water is 100%. The oxygen content of the feed water of the atmospheric deaerator should be less than 15цɡ/L, and the oxygen content of the feed water of the pressure type deaerator should be less than 7цɡ/L.
2. Stable operation without vibration. It can be applied to negative pressure start and sliding pressure operation, which reduces the complicated manual adjustment operation in start and operation.
3. It has the advantages of good adaptability, not demanding water quality and water temperature requirements, and can run about 50% of the force in a short period of time.
4. Small exhaust volume and low energy consumption.
Related products
-
Steam header
The steam header is mainly equipped with a steam boiler, which is used when heating multiple heat-consuming equipment. The inlet and outlet diameters and quantity are designed according to the specific requirements of customers.
-
Boiler Valve
Valves are pipeline accessories used to open and close pipelines, control the flow direction, and adjust and control the parameters (temperature, pressure and flow) of the conveying medium. According to its function, it can be divided into shut-off valve, check valve, regulating valve, etc. The valve is a control component in the fluid conveying system, with functions such as cut-off, regulation, diversion, prevention of backflow, voltage stabilization, diversion or overflow and pressure reli...
-
chemical waste heat boiler
Product Introduction The waste heat boiler is an ideal high-efficiency energy-saving equipment used in the fertilizer, chemical industry (especially methanol, ethanol, methanol, and ammonia) industries. According to the characteristics of waste heat flue gas in this industry, the waste heat boilers developed by our company mainly include vertical and tunnel type natural circulation waste heat boilers. The “three wastes” are the general term fo...
-
smelting waste heat boiler
Product Introduction In the metal smelting production process, the energy consumption of the sintering process accounts for 10% of the total energy consumption, second only to the ironmaking process, ranking Of the total energy consumption of the second sintering process, nearly 50% of the heat energy is discharged into the atmosphere in the form of sensible heat from sintering flue gas and cooler exhaust gas. The waste heat recovery of the fu...
-
Boiler coal conveyor & Slag remover
There are two types of coal loader: belt type and bucket type There are two types of slag remover: scraper type and screw type
-
Boiler Chain Grate
Function introduction of chain grate Chain grate is a kind of mechanized combustion equipment, which is widely used. The function of the chain grate is to allow the solid fuel to burn evenly. The combustion method of the chain grate is a moving fire bed combustion, and the fuel ignition condition is “limited ignition”. The fuel enters the chain grate through the coal hopper, and enters the furnace with the movement of the chain grate to start its combustion process. Therefore, com...