Steam header
The steam header is mainly equipped with a steam boiler, which is used when heating multiple heat-consuming equipment.
The inlet and outlet diameters and quantity are designed according to the specific requirements of customers.
Related products
-
Thermal deaerator
Thermal deaerator (membrane deaerator) is a new type of deaerator, which can remove dissolved oxygen and other gases in the feed water of thermal systems and prevent the corrosion of thermal equipment. It is an important equipment to ensure the safe operation of power plants and industrial boilers. . 1. The oxygen removal efficiency is high, and the qualified rate of oxygen content in the feed water is 100%. The oxygen content of the feed water of the atmospheric deaerator should be less than...
-
Boiler Chain Grate
Function introduction of chain grate Chain grate is a kind of mechanized combustion equipment, which is widely used. The function of the chain grate is to allow the solid fuel to burn evenly. The combustion method of the chain grate is a moving fire bed combustion, and the fuel ignition condition is “limited ignition”. The fuel enters the chain grate through the coal hopper, and enters the furnace with the movement of the chain grate to start its combustion process. Therefore, com...
-
Economizer & Condenser & waste heat b...
Economizers, condensers and waste heat boilers are all used to recover waste heat from flue gas to achieve the purpose of energy saving. In boiler flue gas recovery, economizer and condenser are mainly used in steam boilers, and waste heat boilers are mostly used in heat transfer oil boilers. Among them, the waste heat boiler can be designed as an air preheater, a waste heat hot water boiler, and a waste heat steam boiler according to user needs.
-
Boiler coal conveyor & Slag remover
There are two types of coal loader: belt type and bucket type There are two types of slag remover: scraper type and screw type
-
Carbon waste heat boiler
Product Introduction This series of boilers is a new type of carbon calciner flue gas waste heat boiler developed by our company. It adopts a single drum and vertical layout. The dust-containing flue gas is connected to the desulfurization and dust removal system after passing through the water-cooled settling chamber, the superheating furnace body system, and the soft water heater. After entering the boiler, the high-temperature flue gas firs...
-
smelting waste heat boiler
Product Introduction In the metal smelting production process, the energy consumption of the sintering process accounts for 10% of the total energy consumption, second only to the ironmaking process, ranking Of the total energy consumption of the second sintering process, nearly 50% of the heat energy is discharged into the atmosphere in the form of sensible heat from sintering flue gas and cooler exhaust gas. The waste heat recovery of the fu...