• HXGL-1
  • HXGL-2
  • HXGL-3

ọkụ eletrik kpo oku uzuoku ji esi mmiri ọkụ

Nkọwa dị mkpirikpi:


Nkọwa ngwaahịa

Mkpado ngwaahịa

Atụmatụ

Nchekwa
1.Leakage nchedo: Mgbe ikpo ọkụ na-agbapụta, a ga-ebipụ ọkụ ọkụ n'oge site na eriri sekit na-agbaji iji hụ na nchekwa onwe onye.2.Mgbochi ụkọ mmiri: Mgbe onye na-ekpo ọkụ na-ekpo ọkụ na-adị mkpụmkpụ, bepụ sekit njikwa ọkụ ọkụ na oge iji gbochie ikpo ọkụ ọkụ ọkụ site na ọkụ ọkụ.N'otu oge ahụ, onye na-ahụ maka njikwa na-eziga mkpu maka ụkọ mmiri.3.Steam overpressure Protection: Mgbe ọkụ ọkụ ọkụ ọkụ ọkụ na-agafe elu setịpụ elu ókè nrụgide, a na-arụ ọrụ valvụ nchekwa iji hapụ uzuoku iji belata nrụgide.4.Over-current Protection: Mgbe ọkụ ọkụ na-ebufe ibu (voltaji dị oke elu), onye na-agbaji sekit ga-emeghe ozugbo.5.Power nchedo: A na-eme ihe nchebe a pụrụ ịdabere na ya mgbe ọ chọpụtachara n'elu voltaji, n'okpuru voltaji, na nkwụsị nkwụsị site n'enyemaka nke sekit eletrik dị elu.

Ọdịmma
PLC microcomputer programmable njikwa na ihuenyo ngosi, site na igwe-igwe interface ghọta ọnọdụ okpomọkụ na akpaka akara nke outlet mmiri okpomọkụ, ngosi ihuenyo nwere ike igosipụta akụrụngwa na-agba ọsọ ala na igwe ọdịda mkpu.
Teknụzụ njikwa ọgụgụ isi zuru oke, ọ dịghị mkpa ịnọ n'ọrụ, ọnọdụ ọrụ na-agbanwe agbanwe, enwere ike ịtọ ya na ntuziaka ma ọ bụ ọnọdụ akpaka.
Ọ nwere ọtụtụ ọrụ nchebe zuru oke, gụnyere nchebe ntanye, nchebe ụkọ mmiri, nchebe ala, mkpuchi mkpuchi uzuoku, nchekwa ọkụ na sistemụ nchekwa akpaka ndị ọzọ.

Ezi uche
Iji jiri ike eletrik mee ihe n'ụzọ ziri ezi na nke ọma, a na-ekewa ike ọkụ ọkụ n'ime akụkụ dị iche iche, onye na-ahụ maka ya na-agbanyekwa ozugbo (bipụ) ọkụ ọkụ dịka mkpa dị n'ezie.Mgbe onye ọrụ kpebiri ike kpo oku dị ka mkpa n'ezie si dị, ọ ga-achọ naanị imechi eriri sekit na-agbapụta (ma ọ bụ pịa mgba ọkụ kwekọrọ).Gbanwee).A na-agbanye ma gbanyụọ tube kpo oku na nkebi, nke na-ebelata mmetụta nke ọkụ ọkụ na grid ike n'oge ọrụ.Igwe ọkụ ahụ ọkụ eletrik na-achịkwa kabinet dị iche, nke na-ezere ndụ ọrụ nke akụrụngwa eletrik n'ihi ịka nká, enweghị mkpọtụ, enweghị mmetọ, yana arụmọrụ dị elu.Igwe ọkụ na-ekpo ọkụ na-anabata ihe mkpuchi dị elu na nke ọma, na ọnwụ okpomọkụ dị ntakịrị.

Ntụkwasị obi

① A na-eji argon arc welding kwadoro ahụ onye na-esi mmiri ọkụ, a na-ejikwa aka gbachie mkpuchi ahụ, ma chọpụta ntụpọ X-ray wee nyochaa ya nke ọma.
② Igwe mmiri ọkụ na-eji ihe nchara, nke a na-ahọrọ n'ụzọ siri ike dabere na ụkpụrụ nrụpụta.
③A na-ahọrọ ngwa ndị na-ekpo ọkụ ọkụ site na ngwaahịa dị elu nke ụlọ na nke mba ọzọ, ma jiri igwe ọkụ nwalere ya iji hụ na ọrụ ọkụ ọkụ na-adị ogologo oge.

kekaox

Uru & Ọdịmma

Uru na ọghọm dị na ọkụ ọkụ ọkụ ọkụ ọkụ eletrik

1. Igwe ọkụ na-ekpo ọkụ na-ejikọta tube ọkụ eletrik na-ekpo ọkụ ozugbo iji mepụta uzuoku, na ngwá ọrụ dị mfe iji rụọ ọrụ.
2. Igwe ọkụ ọkụ eletrik na-eri ọtụtụ ike (ton nke okporo ụzọ uzuoku na-eri ihe karịrị 700kw kwa elekere), ya mere ọnụ ahịa ọrụ dị oke elu na ihe ndị a chọrọ maka ịkwado ngwá ọrụ ike dị oke elu, ya mere, evaporation nke ọkụ ọkụ ọkụ eletrik dị elu. dịtụ obere .

1614753271(1)
1614753271

Nka nka

Nlereanya

WDR0.3

WDR0.5

WDR1

WDR1.5

WDR2

WDR3

WDR4

Ike (t/h)

0.3

0.5

1

1.5

2

3

4

Nrụgide Steam (Mpa)

0.7/1.0/1.25

Okpomọkụ uzuoku (℃)

174/183/194

arụmọrụ

98%

Isi iyi ike

380V/50Hz 440V/60Hz

Arọ (kg)

850

1200

1500

1600

2100

2500

3100

Akụkụ(m)

1.7 * 1.4 * 1.6

2.0 * 1.5 * 1.7

2.3 * 1.5 * 1.7

2.8 * 1.5 * 1.7

2.8*1.6*1.9

2.8 * 1.7 * 2.0

2.8 * 2.0 * 2.2


  • Nke gara aga:
  • Osote:

  • Dee ozi gị ebe a ziga anyị ya

    Ngwaahịa ndị emetụtara