Boiler coal conveyor & Slag remover
There are two types of coal loader: belt type and bucket type
There are two types of slag remover: scraper type and screw type
Related products
-
chemical waste heat boiler
Product Introduction The waste heat boiler is an ideal high-efficiency energy-saving equipment used in the fertilizer, chemical industry (especially methanol, ethanol, methanol, and ammonia) industries. According to the characteristics of waste heat flue gas in this industry, the waste heat boilers developed by our company mainly include vertical and tunnel type natural circulation waste heat boilers. The “three wastes” are the general term fo...
-
Boiler Valve
Valves are pipeline accessories used to open and close pipelines, control the flow direction, and adjust and control the parameters (temperature, pressure and flow) of the conveying medium. According to its function, it can be divided into shut-off valve, check valve, regulating valve, etc. The valve is a control component in the fluid conveying system, with functions such as cut-off, regulation, diversion, prevention of backflow, voltage stabilization, diversion or overflow and pressure reli...
-
Thermal deaerator
Thermal deaerator (membrane deaerator) is a new type of deaerator, which can remove dissolved oxygen and other gases in the feed water of thermal systems and prevent the corrosion of thermal equipment. It is an important equipment to ensure the safe operation of power plants and industrial boilers. . 1. The oxygen removal efficiency is high, and the qualified rate of oxygen content in the feed water is 100%. The oxygen content of the feed water of the atmospheric deaerator should be less than...
-
Economizer & Condenser & waste heat b...
Economizers, condensers and waste heat boilers are all used to recover waste heat from flue gas to achieve the purpose of energy saving. In boiler flue gas recovery, economizer and condenser are mainly used in steam boilers, and waste heat boilers are mostly used in heat transfer oil boilers. Among them, the waste heat boiler can be designed as an air preheater, a waste heat hot water boiler, and a waste heat steam boiler according to user needs.
-
Steam header
The steam header is mainly equipped with a steam boiler, which is used when heating multiple heat-consuming equipment. The inlet and outlet diameters and quantity are designed according to the specific requirements of customers.
-
Carbon waste heat boiler
Product Introduction This series of boilers is a new type of carbon calciner flue gas waste heat boiler developed by our company. It adopts a single drum and vertical layout. The dust-containing flue gas is connected to the desulfurization and dust removal system after passing through the water-cooled settling chamber, the superheating furnace body system, and the soft water heater. After entering the boiler, the high-temperature flue gas firs...